About ABAW UAE | Supplier of Rubber & Polyurethane Products

Rubber sheet UAE pricing runs from AED 10 to 150 per kg depending on compound, while standard gaskets cost AED 3 to 50 per piece and flooring and mats cost AED 40 to 150 per sqm. Compound, thickness, and certification drive the final price.

Procurement teams often receive quotes from rubber sheets and rubber products suppliers in UAE that differ by 40% or more for identical items. The gap reflects different assumptions about compound, thickness, certification, and delivery.

This guide breaks down rubber products cost in UAE by category, so you can budget accurately and compare quotes on equal terms.

How Much Do Rubber Products Cost in UAE?

Rubber products cost in the UAE range from AED 3 per piece for standard gaskets to AED 150 per square metre for rubber flooring and up to AED 150 per kg for silicone sheet. Compound, thickness, and certification set the price more than product type does.

The ranges below cover rubber sheet UAE pricing and other common products. They are approximate planning figures, not supplier quotes. Confirm them with written quotations before committing a budget.

Rubber Sheet (SBR/NR, 3–10 mm): AED 10–35 per kg
NBR / EPDM / Neoprene Sheet: AED 18–60 per kg
Silicone Rubber Sheet: AED 60–150 per kg
Rubber Insulation Sheet/Roll (13–25 mm): AED 20–60 per sqm
Rubber Insulation Tube (Pipes): AED 5–25 per meter
Rubber Gasket (Standard Size): AED 3–50 per piece
Custom Rubber Gasket / Molded Parts: AED 5–200+ per piece, tooling extra
EPDM Rubber Seal / Strip: AED 3–20 per meter
Rubber Cable (Flexible, 2.5–16 mm²): AED 4–40 per meter
Rubber Flooring / Mats: AED 40–150 per sqm

What Drives Rubber Products Cost in UAE?

Four variables drive rubber products cost in UAE: compound type, thickness, certification, and order volume. Compound has the largest effect, since nitrile can cost two to three times more than SBR, while thickness scales material use roughly in proportion.

Compound:

SBR is the cheapest. EPDM resists weather and UV. Nitrile resists oil and chemicals. Silicone and fluoroelastomers carry the highest premium and suit extreme-temperature or oil and gas duty.

Thickness:

A 6 mm sheet can cost around 50% more per m² than 3 mm of the same grade.

Certification:

Tested, standards-compliant material typically adds 15–30% (based on UK benchmarks; UAE premiums vary).

Volume and tooling:

Custom parts add one-off mould or die costs that amortise over larger runs.

A rubber sheet UAE specification must account for local conditions. Ambient temperatures above 45°C and constant UV exposure crack low-grade SBR outdoors within a season.

The cheapest unit price can therefore become the most expensive replacement cycle. Specify compounds against a recognised classification such as ASTM D2000.

How Do You Compare Rubber Supplier Quotes?

Compare quotes on landed cost per year of service, not unit price. Normalise every quote from your rubber sheets and rubber products suppliers in UAE to the same compound, hardness, thickness, tolerance, and delivery terms, then divide the total by expected service life.

Use this five-point Landed Cost Evaluation Matrix, scoring each supplier from 1 to 5:

Spec parity: Compound, Shore A hardness, thickness, and tolerance match your drawing.
Documentation: Material datasheets, test reports, and batch traceability are supplied.
Availability: Local stock versus import lead time.
Landed cost: Freight, 5% VAT, and installation are included.
Service life: Expected replacement interval under UAE heat and UV.

What Hidden Costs Raise Rubber Products Cost in UAE?

Hidden costs include freight on heavy goods, 5% VAT, installation labour, and early replacement. On bulky items such as flooring rolls, these can outweigh a small unit-price saving. Budget for them before you compare unit prices.

Apply these risk controls:

Request batch certificates for critical seals and gaskets.
Keep spares for components on single points of failure.
Define the operating temperature and chemical exposure in every purchase order.
Re-quote long contracts periodically, as raw material prices move.

For recurring volumes, custom rubber components cut waste by matching the part to the duty cycle, rather than forcing a standard size.

Final Recommendations

Budget with the ranges above, then validate them with at least three written quotes built on an identical specification. Score each against the matrix and choose the lowest landed cost per year of service.

Al Burhan Al Wadeh supplies rubber products to industrial buyers across the UAE, and can review a specification against your duty conditions.

Need a firm quote or help choosing the right compound? Contact our team with your specification, and we will recommend the right fit for your application and budget.

FAQ

Which rubber is cheapest in the UAE?

SBR is the cheapest common compound, often made with recycled content. It suits indoor mats and light-duty sheet. Avoid it outdoors or near oils, because UV, heat, and chemicals degrade it quickly, and replacement costs then erase the initial saving.

Is importing rubber products cheaper than buying locally?

Importing can lower unit prices on large volumes, but freight, customs, and longer lead times add cost and risk. Local stock suits urgent or small orders. Compare both options on landed cost, including delay exposure, before deciding.

How long do rubber products last in UAE heat?

Quality indoor rubber flooring often lasts 10 to 20 years. Outdoor service life is shorter and depends on the compound, since EPDM tolerates UV and heat far better than SBR. Confirm expected life in writing from your supplier.

Rubber Products Cost in UAE: Price Guide and Tips